FLOORA Screed is a self leveling epoxy screed providing long lasting protection to concrete surface, It’s designed to have high mechanical strength, abrasion and chemical resistant properties. Easy and fast application, good durability, seamless floor .It is recommended for application in all Industrial verticals, pharmaceutical plants, laboratory floors, Automotive Industries & Auto ancillaries units etc.
Epoxy Resin & binder with separately packed amine hardener & Sand.
|Mixing Ratio||By weight|
|Component A||2 parts|
|Component B||1 parts|
|Component c||7 part (sand)|
|Colour||Clear with send|
|Thickness||1mm to 4mm|
|Pot Life||30mins. at 30°C|
|Curing Mechanism||Chemical reaction between the components|
|Flash Point||Above 25°C|
|Recoating Time||Min. 16Hrs at 30°C|
|Topcoating Time||Max.48 hrs at30°C|
|Drying Time (30c)|
|Surface Dry||Max. 4-5Hrs|
|Hard Dry||18-24 Hrs.|
|Full Cure||7 Days|
Epoxy primed surface.
Trowel & Roller.
12 months under normal storage condition in original
sealed containers at 30°C
Primed surface must be clean, dry, free of moisture and other
Stir the component A and component B respectively. If settling observed in the component A, loosen the settled material and mix it with the help of pneumatic stirrer. Mix component C gradually in the component A in the specified ratio under continuous stirring till homogeneous then Add component B.
Do not part mix or vary mixing ratio.
Surface temperature must be at least 3°C above Dew Point to prevent condensation.
Air 5 – 40°C
Surface 5 – 50°C
Practical covering capacity depends on application
techniqueS, ambient conditions, wastage, surface condition
Please refer to the Material Safety Data Sheet.
DURGA BONDCHEM PVT LTD
PLOT NO 222, POR INDUSTRIAL PARK,
B/H SAHYOG HOTEL NH.8,
AT & POST POR ,VADODARA, GUJARAT(INDIA).
FF -1, SURDHARA COMPLEX,