FLOORA SHINE

.

FLOORA SHINE

DESCRIPTION

FLOORA SHINE is a self leveling epoxy floor coating providing long lasting protection to concrete. It is easy to apply and suitable for new concrete or refurbishment. It is recommended for application in Industrial and commercial warehouses & shop floors, Power plants, food & beverage facilities, pharmaceutical plants, waste water & sewage treatment plants, laboratory floors, Automotive Industries & Auto ancillaries ,units etc. The product is with High abrasion Resistance, mechanical properties.

COMPOSITION

 Pigments and sand dispersed in epoxy binder with separately packed amine hardener & Sand.

VOLUME SOLIDS                                           ∼100

DFT / COAT                                                   0.8 – 1.20 MM

THEORETICAL COVERAGE / COAT             0.62 m2  / kg at 1000 microns DFT

 PRODUCT DETAILS

Type Three Pack
Mixing Ratio By weight
Component A 40 parts
Component B 10 parts
Component C 50 parts (Sand)
Colour Desired
Gloss Semi-Glossy
Pot Life 30 mins. at 30°C
Curing Mechanism Chemical reaction between the components
Flash Point Above 25°C
Recoating Time Min. 16 Hrs at 30°C
Topcoating Time Max. 48 hours at 30°C
Drying Time @ (30°C)
(i)                Surface Dry Max. 4-5 Hrs.
(ii)              Hard Dry 18 – 24 Hrs.

APPLICATION DETAILS

APPLIED OVER: Epoxy primed surface.

 APPLICATION METHOD: Trowel & Roller.

 SHELF LIFE: 12 months under normal storage condition in original sealed containers at 30°C

PACK SIZE: 10 Kg.

 SURFACE PREPARATION:

Primed surface must be clean, dry, free of moisture and other contaminants.

 APPLICATION INSTRUCTION:

Stir the component A and component B respectively. If settling observed in the component A, loosen the settled material and mix it with the help of pneumatic stirrer. Mix component C gradually in the component A in the specified ratio under continuous stirring till homogeneous then Add component B. Do not part mix or vary mixing ratio.

 ENVIRONMENTAL CONDITIONS:

Surface temperature must be at least 3°C above Dew Point to prevent condensation.

 TEMPERATURE:

5 – 40°C

5 – 50°C

 SPECIAL NOTES:

Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc. FLOORA SHINE is subject to colour change upon ageing. There may be minor variation in shade from batch to batch.

CONTACT INFO

durgabondchem222@gmail.com

+91-7226026222

DURGA BONDCHEM PVT LTD
PLOT NO 222, POR INDUSTRIAL PARK,
B/H SAHYOG HOTEL NH.8,
AT & POST POR ,VADODARA, GUJARAT(INDIA).
+91 9624091009
+91 9624414260

Registered office:
FF -1, SURDHARA COMPLEX,
NR.SARSWATI COMPLEX,
MANJALPUR
VADODARA-11
GUJARAT(INDIA)

SOCIAL MEDIA

Inquiry Form

Copyright ©2021 Power Fix LLC. All Rights Reserved.

Design & Developed By: WebMobi Technologies