FLOORA SUNSHINE

.

FLOORA SUNSHINE

Product Description

Powerfix Floora Sunshine is a self leveling solvent less polyurethane topcoats designed to have mechanical  strength , high abrasion & impact resistance and chemical resistant properties. Easy and fast application, good durability, seamless floor. Excellent flexibility and tensile property.

Intended Uses

Industries at all verticals like Pharmaceuticals , Chemical, Automobiles , Hospitals, Electronics Assembly, Steel , Workshops, clean rooms , Engineering Warehouses, Aircraft Hangers, Textile etc..

Product Details

 

Thickness range 0.5 to 2mm 
Finish Matt, Semi-Glossy,Glossy

 

Chemical Base SL Polyurethane 
Mixing Ratio As supplied 
Coverage kg/ Sq.mtr 1.6 Kg / Sq.mtr for 1mm 
Recommended No of coats One / Two 
Re-Coating Interval Min. 16 Hrs 
Drying Time to walk 24 hrs 
Curing Time 7 days for full cure andfor light traffic 48 Hrs

 

Pot Life 30 mins.
Shelf Life ( under std conditions) 12 months 
Recommended System Primer + Screed + SL 

 

Inspection & Surface Preparation

It is most important that substrate surface is correctly thoroughly prepared prior to application of recommended paint system.

  1. New Concrete or cementitous substrates should have been placed for at least 28 days and have a moisture content of less then 5% before topping with Floora Epoxy Screed.
  2. Old Concrete surfaces should be free from dust particles, oily impurities (either by flame, solvent, detergent) to be thoroughly cleared from surfaces before applications of paint system.

Application Details

Mixing Process:

Pack components are pre-weighed for optimum performance. Never splits packs. Mix the packs supplied as per recommended mixing ratio with continues uniform stirring.

Applied over:

Applied on screed surfaces floor coatings at either Concrete or M.S. substrate.

Application Method:

Roller/Trowel and to be applied by specialist skilled contractors.

Shelf Life:

12 months under normal storage condition in original sealed containers at 30°C

Environmental Conditions:

Surface temperature must be 3°C above Dew Point to prevent condensation. Moisture below 5% and surface to be completely dry.

Temperature:

AIR 5-400 C
SURFACE 5-500 C

 

Special Notes:

Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc.

Safety Precautions:

Please refer to the Material Safety Data Sheet.

Properties :

 

Flexural strength 20 Mpa 
Tensile strength >15 Mpa 
Impact resistance Passes 
Slip resistance Satisfactory under BS 8204, Wet & Dry 

 

 

CONTACT INFO

durgabondchem222@gmail.com

+91-7226026222

DURGA BONDCHEM PVT LTD
PLOT NO 222, POR INDUSTRIAL PARK,
B/H SAHYOG HOTEL NH.8,
AT & POST POR ,VADODARA, GUJARAT(INDIA).
+91 9624091009
+91 9624414260

Registered office:
FF -1, SURDHARA COMPLEX,
NR.SARSWATI COMPLEX,
MANJALPUR
VADODARA-11
GUJARAT(INDIA)

SOCIAL MEDIA

Inquiry Form

Copyright ©2021 Power Fix LLC. All Rights Reserved.

Design & Developed By: WebMobi Technologies