POLYSEAL PRIME

.

POLYSEAL PRIME

DISCRIPTION

POLYSEAL PRIME  is a special clear coating recommended for application on concrete / steel surfaces as a sealer coat after proper necessary surface preparation. This coating provides excellent adhesion and high degree of protection against natural weather, highly corrosive and humid atmospheres. It is recommended for application at all industrial verticals shop floors, Power plants, food & beverage facilities, pharmaceutical, Automotive Industries & Auto ancillaries, units etc.

Composition

A clear solution of epoxy binder with separately packed clear amide hardener.

PRODUCT DETAILS

TYPE THREE PACK
VOLUME SOLIDS 50 %
MIXING RATIO BY WEIGHT
COMPONENT A 1 PART
COMPONENT B 1 PART
DFT / COAT 50-100 MICRONS
COLOUR CLEAR
FINISH & GLOSS SMOOTH & MATT
POT LIFE 6-8 hrs @ 30°C
CURING MECHANISM CHEMICAL REACTION BETWEEN THE COMPONENTS
FLASH POINT ABOVE 25°C
RECOATING TIME MIN 3 hrs @ 30°C
TOP COATING TIME MIN 16 hrs @ 30°C
DRYING TIME 30-45 Mins @ 30°C
HARD TIME 16 – 18 hrs


Application Details

Applied over:

Prepared dust free surfaces.

Application Method: Brush & Roller.

Shelf Life:

12 months under normal storage condition in original sealed containers at 30°C

Pack Size: 20 Ltrs.

Surface Preparation:

Surfaces should be thoroughly cleaned with grinder, and free from dust, any impurities, moisture free and other contaminants.  For any Oily Surfaces, to be cleaned with Compatible thinner or flame cleaning.

Application Instruction:

Stir the component A and component B respectively. Mix component B gradually in the component A in the specified ratio under continuous stirring till homogeneous. Use recommended thinner as specified for brush and spray application.

Environmental Conditions:

Surface temperature must be at least 3°C above Dew Point to prevent condensation.

Temperature:

5 – 40°C

5 – 50°C

Special Notes:

Thinner consumption may vary depending upon site condition. Practical covering capacity depends on application technique, ambient condition, wastage, surface condition, porosity of the concrete etc. and varies up to 50% to 60%.

Safety Precautions:

Please refer to the Material Safety Data Sheet.

CONTACT INFO

durgabondchem222@gmail.com

+91-7226026222

DURGA BONDCHEM PVT LTD
PLOT NO 222, POR INDUSTRIAL PARK,
B/H SAHYOG HOTEL NH.8,
AT & POST POR ,VADODARA, GUJARAT(INDIA).
+91 9624091009
+91 9624414260

Registered office:
FF -1, SURDHARA COMPLEX,
NR.SARSWATI COMPLEX,
MANJALPUR
VADODARA-11
GUJARAT(INDIA)

SOCIAL MEDIA

Inquiry Form

Copyright ©2021 Power Fix LLC. All Rights Reserved.

Design & Developed By: WebMobi Technologies