Description

POWERFIX FLOOR HARDENER is a mixture of aggregates, plasticizer and cement binder. It is an economical concrete floor hardener recommended for both interior and exterior use. POWERFIX FLOOR HARDENR produces a hard, dense, sear resistant surface which resists corrosion and absorption grease, alkalis and most chemicals. POWERFIX FLOOR HARDENR is available in Grey, Red, Yellow and Green color.

Uses

• Lobbies, commercial corridors, restaurants, dairies and public buildings.

• Auto showrooms, service centers, factory and warehouse floors.

 Instruction for use

Calculate the total quantity of POWERFIX FLOOR HARDENER to be used, Remove any bleed water, which is present on the surface. Applying the First Shake Transfer POWERFIX FLOOR HARDENER powder from the bags to pails of a size convenient for handling by the person walking on the freshly oated surface. When the concrete has set enough to leave a 3-6 mm foot print on the surface, start broadcasting 2/3rd of the quantity evenly over the surface. As soon as the material darkens, start working on the surface with wooden oat. Power ats can be used but make sure that the surface is not overworked which results in excessive moisture surface

As the oating proceeds, immediately follow the process by broadcasting, at right angles to the initial broadcast, the balance 1/3rd of the quantity set apart. Once the material darkens, oat the surface with a poser oat bringing the moisture completely though. In the case of heavy duty application the rst broad cast will be cone only with the half the quantity. This is followed by two separate broadcasts each with the quantity and at right angle to each other bay edges. Extreme care and attention should be given at the bay edges and corners as they endure heavy wear and tear. Bay edges are usually reinforced with one of the following ways.

1. Immediately after the leveling of the fresh concrete, sprinkle by hand at a rate of 5 kg / m² in strips of 10 cm width along

the   bay  edges  (i . e . ,       0 . 5       kg           per        running meter)

2. Immediately after the leveling of the fresh concrete, remove a edge of concrete 10mm deep at the edges. Then apply a stiff mass of POWERFIX FLOOR HARDENER mixed with clean water. This must be fully compacted.

Curing

Proper curing of the surface of the surface is very important for the achievement of the required physical properties of the nished oor. Salt water and brackish water should not be used for any curing purposes. .Please refer the detailed method statements for more intricate details on application.

Packing & Coverage

Packing : 40 kg.

Coverage

Light duty : 3 kg/m²

Medium duty : 5 kg/m²

Heavy duty : 7 kg/m²

Shelf Life & Storage : 12 MONTHS FROM THE DATE OF MANUFACTURING IN UNOPENED CONDITION.